Operator

enum Operator : String, Codable, CaseIterable

Undocumented

  • For two inputs, returns the result of subtracting the second input from the first. For a single input, returns the result of subtracting it from 0.

    Declaration

    Swift

    case subtract = "-"
  • not

    Logical negation. Returns true if the input is false, and false if the input is true.

    Declaration

    Swift

    case not = "!"
  • neq

    Returns true if the input values are not equal, false otherwise. The comparison is strictly typed: values of different runtime types are always considered unequal. Cases where the types are known to be different at parse time are considered invalid and will produce a parse error. Accepts an optional collator argument to control locale-dependent string comparisons.

    Declaration

    Swift

    case neq = "!="
  • Returns the product of the inputs.

    Declaration

    Swift

    case product = "*"
  • Returns the result of floating point division of the first input by the second.

    Declaration

    Swift

    case division = "/"
  • mod

    Returns the remainder after integer division of the first input by the second.

    Declaration

    Swift

    case mod = "%"
  • pow

    Returns the result of raising the first input to the power specified by the second.

    Declaration

    Swift

    case pow = "^"
  • sum

    Returns the sum of the inputs.

    Declaration

    Swift

    case sum = "+"
  • lt

    Returns true if the first input is strictly less than the second, false otherwise. The arguments are required to be either both strings or both numbers; if during evaluation they are not, expression evaluation produces an error. Cases where this constraint is known not to hold at parse time are considered in valid and will produce a parse error. Accepts an optional collator argument to control locale-dependent string comparisons.

    Declaration

    Swift

    case lt = "<"
  • lte

    Returns true if the first input is less than or equal to the second, false otherwise. The arguments are required to be either both strings or both numbers; if during evaluation they are not, expression evaluation produces an error. Cases where this constraint is known not to hold at parse time are considered in valid and will produce a parse error. Accepts an optional collator argument to control locale-dependent string comparisons.

    Declaration

    Swift

    case lte = "<="
  • eq

    Returns true if the input values are equal, false otherwise. The comparison is strictly typed: values of different runtime types are always considered unequal. Cases where the types are known to be different at parse time are considered invalid and will produce a parse error. Accepts an optional collator argument to control locale-dependent string comparisons.

    Declaration

    Swift

    case eq = "=="
  • gt

    Returns true if the first input is strictly greater than the second, false otherwise. The arguments are required to be either both strings or both numbers; if during evaluation they are not, expression evaluation produces an error. Cases where this constraint is known not to hold at parse time are considered in valid and will produce a parse error. Accepts an optional collator argument to control locale-dependent string comparisons.

    Declaration

    Swift

    case gt = ">"
  • gte

    Returns true if the first input is greater than or equal to the second, false otherwise. The arguments are required to be either both strings or both numbers; if during evaluation they are not, expression evaluation produces an error. Cases where this constraint is known not to hold at parse time are considered in valid and will produce a parse error. Accepts an optional collator argument to control locale-dependent string comparisons.

    Declaration

    Swift

    case gte = ">="
  • abs

    Returns the absolute value of the input.

    Declaration

    Swift

    case abs = "abs"
  • Gets the value of a cluster property accumulated so far. Can only be used in the clusterProperties option of a clustered GeoJSON source.

    Declaration

    Swift

    case accumulated = "accumulated"
  • Returns the arccosine of the input.

    Declaration

    Swift

    case acos = "acos"
  • all

    Returns true if all the inputs are true, false otherwise. The inputs are evaluated in order, and evaluation is short-circuiting: once an input expression evaluates to false, the result is false and no further input expressions are evaluated.

    Declaration

    Swift

    case all = "all"
  • any

    Returns true if any of the inputs are true, false otherwise. The inputs are evaluated in order, and evaluation is short-circuiting: once an input expression evaluates to true, the result is true and no further input expressions are evaluated.

    Declaration

    Swift

    case any = "any"
  • Asserts that the input is an array (optionally with a specific item type and length). If, when the input expression is evaluated, it is not of the asserted type, then this assertion will cause the whole expression to be aborted.

    Declaration

    Swift

    case array = "array"
  • Returns the arcsine of the input.

    Declaration

    Swift

    case asin = "asin"
  • at

    Retrieves an item from an array.

    Declaration

    Swift

    case at = "at"
  • Returns the arctangent of the input.

    Declaration

    Swift

    case atan = "atan"
  • Asserts that the input value is a boolean. If multiple values are provided, each one is evaluated in order until a boolean is obtained. If none of the inputs are booleans, the expression is an error.

    Declaration

    Swift

    case boolean = "boolean"
  • Selects the first output whose corresponding test condition evaluates to true, or the fallback value otherwise.

    Declaration

    Swift

    case switchCase = "case"
  • Returns the smallest integer that is greater than or equal to the input.

    Declaration

    Swift

    case ceil = "ceil"
  • Evaluates each expression in turn until the first non-null value is obtained, and returns that value.

    Declaration

    Swift

    case coalesce = "coalesce"
  • Returns a collator for use in locale-dependent comparison operations. The case-sensitive and diacritic-sensitive options default to false. The locale argument specifies the IETF language tag of the locale to use. If none is provided, the default locale is used. If the requested locale is not available, the collator will use a system-defined fallback locale. Use resolved-locale to test the results of locale fallback behavior.

    Declaration

    Swift

    case collator = "collator"
  • Returns a string consisting of the concatenation of the inputs. Each input is converted to a string as if by to-string.

    Declaration

    Swift

    case concat = "concat"
  • cos

    Returns the cosine of the input.

    Declaration

    Swift

    case cos = "cos"
  • Returns the shortest distance in meters between the evaluated feature and the input geometry. The input value can be a valid GeoJSON of type Point, MultiPoint, LineString, MultiLineString, Polygon, MultiPolygon, Feature, or FeatureCollection. Distance values returned may vary in precision due to loss in precision from encoding geometries, particularly below zoom level 13.

    Declaration

    Swift

    case distance = "distance"
  • Returns the input string converted to lowercase. Follows the Unicode Default Case Conversion algorithm and the locale-insensitive case mappings in the Unicode Character Database.

    Declaration

    Swift

    case downcase = "downcase"
  • e

    Returns the mathematical constant e.

    Declaration

    Swift

    case e = "e"
  • Retrieves a property value from the current feature’s state. Returns null if the requested property is not present on the feature’s state. A feature’s state is not part of the GeoJSON or vector tile data, and must be set programmatically on each feature. Features are identified by their id attribute, which must be an integer or a string that can be cast to an integer. Note that [“feature-state”] can only be used with paint properties that support data-driven styling.

    Declaration

    Swift

    case featureState = "feature-state"
  • Returns the largest integer that is less than or equal to the input.

    Declaration

    Swift

    case floor = "floor"
  •      *  Returns a `formatted` string for displaying mixed-format text in the `text-field` property. The input may contain a string literal or expression, including an [`'image'`](#types-image) expression. Strings may be followed by a style override object that supports the following properties:
    
    • "text-font": Overrides the font stack specified by the root layout property.
    • "text-color": Overrides the color specified by the root paint property.
    • "font-scale": Applies a scaling factor on text-size as specified by the root layout property.

    Declaration

    Swift

    case format = "format"
  • Gets the feature’s geometry type: Point, MultiPoint, LineString, MultiLineString, Polygon, MultiPolygon.

    Declaration

    Swift

    case geometryType = "geometry-type"
  • get

    Retrieves a property value from the current feature’s properties, or from another object if a second argument is provided. Returns null if the requested property is missing.

    Declaration

    Swift

    case get = "get"
  • has

    Tests for the presence of an property value in the current feature’s properties, or from another object if a second argument is provided.

    Declaration

    Swift

    case has = "has"
  • Gets the kernel density estimation of a pixel in a heatmap layer, which is a relative measure of how many data points are crowded around a particular pixel. Can only be used in the heatmap-color property.

    Declaration

    Swift

    case heatmapDensity = "heatmap-density"
  • id

    Gets the feature’s id, if it has one.

    Declaration

    Swift

    case id = "id"
  • Returns an image type for use in icon-image, *-pattern entries and as a section in the format expression. If set, the image argument will check that the requested image exists in the style and will return either the resolved image name or null, depending on whether or not the image is currently in the style. This validation process is synchronous and requires the image to have been added to the style before requesting it in the image argument.

    Declaration

    Swift

    case image = "image"
  • Determines whether an item exists in an array or a substring exists in a string.

    Declaration

    Swift

    case inExpression = "in"
  • Returns the first position at which an item can be found in an array or a substring can be found in a string, or -1 if the input cannot be found. Accepts an optional index from where to begin the search.

    Declaration

    Swift

    case indexOf = "index-of"
  •      *  Produces continuous, smooth results by interpolating between pairs of input and output values ("stops"). The `input` may be any numeric expression (e.g., `["get", "population"]`). Stop inputs must be numeric literals in strictly ascending order. The output type must be `number`, `array<number>`, or `color`.
    

    Interpolation types:

    • ["linear"]: Interpolates linearly between the pair of stops just less than and just greater than the input.
    • ["exponential", base]: Interpolates exponentially between the stops just less than and just greater than the input. base controls the rate at which the output increases: higher values make the output increase more towards the high end of the range. With values close to 1 the output increases linearly.
    • ["cubic-bezier", x1, y1, x2, y2]: Interpolates using the cubic bezier curve defined by the given control points.

    Declaration

    Swift

    case interpolate = "interpolate"
  • Returns true if the input string is expected to render legibly. Returns false if the input string contains sections that cannot be rendered without potential loss of meaning (e.g. Indic scripts that require complex text shaping, or right-to-left scripts if the the mapbox-gl-rtl-text plugin is not in use in Mapbox GL JS).

    Declaration

    Swift

    case isSupportedScript = "is-supported-script"
  • Gets the length of an array or string.

    Declaration

    Swift

    case length = "length"
  • Binds expressions to named variables, which can then be referenced in the result expression using [“var”, “variable_name”].

    Declaration

    Swift

    case letExpression = "let"
  • Gets the progress along a gradient line. Can only be used in the line-gradient property.

    Declaration

    Swift

    case lineProgress = "line-progress"
  • Provides a literal array or object value.

    Declaration

    Swift

    case literal = "literal"
  • ln

    Returns the natural logarithm of the input.

    Declaration

    Swift

    case ln = "ln"
  • ln2

    Returns mathematical constant ln(2).

    Declaration

    Swift

    case ln2 = "ln2"
  • Returns the base-ten logarithm of the input.

    Declaration

    Swift

    case log10 = "log10"
  • Returns the base-two logarithm of the input.

    Declaration

    Swift

    case log2 = "log2"
  •      *  Selects the output whose label value matches the input value, or the fallback value if no match is found. The input can be any expression (e.g. `["get", "building_type"]`). Each label must be either:
    
    • a single literal value; or
    • an array of literal values, whose values must be all strings or all numbers (e.g. [100, 101] or ["c", "b"]). The input matches if any of the values in the array matches, similar to the "in" operator. Each label must be unique. If the input type does not match the type of the labels, the result will be the fallback value.

    Declaration

    Swift

    case match = "match"
  • max

    Returns the maximum value of the inputs.

    Declaration

    Swift

    case max = "max"
  • min

    Returns the minimum value of the inputs.

    Declaration

    Swift

    case min = "min"
  • Asserts that the input value is a number. If multiple values are provided, each one is evaluated in order until a number is obtained. If none of the inputs are numbers, the expression is an error.

    Declaration

    Swift

    case number = "number"
  • Converts the input number into a string representation using the providing formatting rules. If set, the locale argument specifies the locale to use, as a BCP 47 language tag. If set, the currency argument specifies an ISO 4217 code to use for currency-style formatting. If set, the min-fraction-digits and max-fraction-digits arguments specify the minimum and maximum number of fractional digits to include.

    Declaration

    Swift

    case numberFormat = "number-format"
  • Asserts that the input value is an object. If multiple values are provided, each one is evaluated in order until an object is obtained. If none of the inputs are objects, the expression is an error.

    Declaration

    Swift

    case objectExpression = "object"
  • pi

    Returns the mathematical constant pi.

    Declaration

    Swift

    case pi = "pi"
  • Gets the feature properties object. Note that in some cases, it may be more efficient to use [“get”, “property_name”] directly.

    Declaration

    Swift

    case properties = "properties"
  • Returns the IETF language tag of the locale being used by the provided collator. This can be used to determine the default system locale, or to determine if a requested locale was successfully loaded.

    Declaration

    Swift

    case resolvedLocale = "resolved-locale"
  • rgb

    Creates a color value from red, green, and blue components, which must range between 0 and 255, and an alpha component of 1. If any component is out of range, the expression is an error.

    Declaration

    Swift

    case rgb = "rgb"
  • Creates a color value from red, green, blue components, which must range between 0 and 255, and an alpha component which must range between 0 and 1. If any component is out of range, the expression is an error.

    Declaration

    Swift

    case rgba = "rgba"
  • Rounds the input to the nearest integer. Halfway values are rounded away from zero. For example, ["round", -1.5] evaluates to -2.

    Declaration

    Swift

    case round = "round"
  • sin

    Returns the sine of the input.

    Declaration

    Swift

    case sin = "sin"
  • Gets the distance of a point on the sky from the sun position. Returns 0 at sun position and 1 when the distance reaches sky-gradient-radius. Can only be used in the sky-gradient property.

    Declaration

    Swift

    case skyRadialProgress = "sky-radial-progress"
  • Returns an item from an array or a substring from a string from a specified start index, or between a start index and an end index if set. The return value is inclusive of the start index but not of the end index.

    Declaration

    Swift

    case slice = "slice"
  • Returns the square root of the input.

    Declaration

    Swift

    case sqrt = "sqrt"
  • Produces discrete, stepped results by evaluating a piecewise-constant function defined by pairs of input and output values (“stops”). The input may be any numeric expression (e.g., ["get", "population"]). Stop inputs must be numeric literals in strictly ascending order. Returns the output value of the stop just less than the input, or the first output if the input is less than the first stop.

    Declaration

    Swift

    case step = "step"
  • Asserts that the input value is a string. If multiple values are provided, each one is evaluated in order until a string is obtained. If none of the inputs are strings, the expression is an error.

    Declaration

    Swift

    case string = "string"
  • tan

    Returns the tangent of the input.

    Declaration

    Swift

    case tan = "tan"
  • Converts the input value to a boolean. The result is false when then input is an empty string, 0, false, null, or NaN; otherwise it is true.

    Declaration

    Swift

    case toBoolean = "to-boolean"
  • Converts the input value to a color. If multiple values are provided, each one is evaluated in order until the first successful conversion is obtained. If none of the inputs can be converted, the expression is an error.

    Declaration

    Swift

    case toColor = "to-color"
  • Converts the input value to a number, if possible. If the input is null or false, the result is 0. If the input is true, the result is 1. If the input is a string, it is converted to a number as specified by the “ToNumber Applied to the String Type” algorithm of the ECMAScript Language Specification. If multiple values are provided, each one is evaluated in order until the first successful conversion is obtained. If none of the inputs can be converted, the expression is an error.

    Declaration

    Swift

    case toNumber = "to-number"
  • Returns a four-element array containing the input color’s red, green, blue, and alpha components, in that order.

    Declaration

    Swift

    case toRgba = "to-rgba"
  • Converts the input value to a string. If the input is null, the result is "". If the input is a boolean, the result is "true" or "false". If the input is a number, it is converted to a string as specified by the “NumberToString” algorithm of the ECMAScript Language Specification. If the input is a color, it is converted to a string of the form "rgba(r,g,b,a)", where r, g, and b are numerals ranging from 0 to 255, and a ranges from 0 to 1. Otherwise, the input is converted to a string in the format specified by the JSON.stringify function of the ECMAScript Language Specification.

    Declaration

    Swift

    case toString = "to-string"
  • Returns a string describing the type of the given value.

    Declaration

    Swift

    case typeofExpression = "typeof"
  • Returns the input string converted to uppercase. Follows the Unicode Default Case Conversion algorithm and the locale-insensitive case mappings in the Unicode Character Database.

    Declaration

    Swift

    case upcase = "upcase"
  • References variable bound using “let”.

    Declaration

    Swift

    case varExpression = "var"
  •      *  Returns `true` if the evaluated feature is fully contained inside a boundary of the input geometry, `false` otherwise. The input value can be a valid GeoJSON of type `Polygon`, `MultiPolygon`, `Feature`, or `FeatureCollection`. Supported features for evaluation:
    
    • Point: Returns false if a point is on the boundary or falls outside the boundary.
    • LineString: Returns false if any part of a line falls outside the boundary, the line intersects the boundary, or a line’s endpoint is on the boundary.

    Declaration

    Swift

    case within = "within"
  • Gets the current zoom level. Note that in style layout and paint properties, [“zoom”] may only appear as the input to a top-level “step” or “interpolate” expression.

    Declaration

    Swift

    case zoom = "zoom"
  • Undocumented

    Declaration

    Swift

    case linear = "linear"
  • Undocumented

    Declaration

    Swift

    case exponential = "exponential"
  • Undocumented

    Declaration

    Swift

    case cubicBezier = "cubic-bezier"