MapboxMap

public final class MapboxMap : MapboxMapProtocol
extension MapboxMap: MapEventsObservable

MapboxMap provides access to the map model, including the camera, style, observable map events, and querying rendered features. Obtain the MapboxMap instance for a MapView via MapView.mapboxMap.

Important

MapboxMap should only be used from the main thread.
  • The style object supports run time styling.

    Declaration

    Swift

    public let style: Style
  • Triggers a repaint of the map. Calling this method is typically unnecessary but may be needed if using a custom layer that needs to be redrawn independently of other map changes.

    Declaration

    Swift

    public func triggerRepaint()
  • Loads a style from a StyleURI, calling a completion closure when the style is fully loaded or there has been an error during load.

    Declaration

    Swift

    public func loadStyleURI(_ styleURI: StyleURI, completion: ((Result<Style, Error>) -> Void)? = nil)

    Parameters

    styleURI

    StyleURI to load

    completion

    Closure called when the style has been fully loaded. The Result type encapsulates the Style or error that occurred. See MapLoadingError

  • Loads a style from a JSON string, calling a completion closure when the style is fully loaded or there has been an error during load.

    Declaration

    Swift

    public func loadStyleJSON(_ JSON: String, completion: ((Result<Style, Error>) -> Void)? = nil)

    Parameters

    styleURI

    Style JSON string

    completion

    Closure called when the style has been fully loaded. The Result type encapsulates the Style or error that occurred. See MapLoadingError

  • When loading a map, if prefetchZoomDelta is set to any number greater than 0, the map will first request a tile for zoom - prefetchZoomDelta in an attempt to display a full map at lower resolution as quick as possible.

    It will get clamped at the tile source minimum zoom. The default delta is 4.

    Declaration

    Swift

    public var prefetchZoomDelta: UInt8 { get set }
  • The memory budget hint to be used by the map. The budget can be given in tile units or in megabytes. A Map will do its best to keep the memory allocations for non-essential resources within the budget.

    The memory budget distribution and resource eviction logic is subject to change. Current implementation sets a memory budget hint per data source.

    If nil is set, the memory budget in tile units will be dynamically calculated based on the current viewport size.

    Declaration

    Swift

    @_spi(Experimental)
    public func setMemoryBudget(_ memoryBudget: MapMemoryBudget?)

    Parameters

    memoryBudget

    The memory budget hint to be used by the Map.

  • Enables or disables the experimental render cache feature.

    Render cache is an experimental feature aiming to reduce resource usage of map rendering by caching intermediate rendering results of tiles into specific cache textures for reuse between frames. Performance benefit of the cache depends on the style as not all layers are cacheable due to e.g. viewport aligned features. Render cache always prefers quality over performance.

    Declaration

    Swift

    @_spi(Experimental)
    public func setRenderCache(_ cacheOptions: RenderCacheOptions)

    Parameters

    cacheOptions

    The cache options to be set to the Map.

  • Defines whether multiple copies of the world will be rendered side by side beyond -180 and 180 degrees longitude.

    If disabled, when the map is zoomed out far enough that a single representation of the world does not fill the map’s entire container, there will be blank space beyond 180 and -180 degrees longitude. In this case, features that cross 180 and -180 degrees longitude will be cut in two (with one portion on the right edge of the map and the other on the left edge of the map) at every zoom level.

    By default, shouldRenderWorldCopies is set to true.

    Declaration

    Swift

    public var shouldRenderWorldCopies: Bool { get set }
  • Gets the resource options for the map.

    All optional fields of the returned object are initialized with the actual values.

    Note

    The result of this property is different from the ResourceOptions that were provided to the map’s initializer.

    Declaration

    Swift

    public var resourceOptions: ResourceOptions { get }
  • Clears temporary map data.

    Clears temporary map data from the data path defined in the given resource options. Useful to reduce the disk usage or in case the disk cache contains invalid data.

    Note

    Calling this API will affect all maps that use the same data path and does not affect persistent map data like offline style packages.

    Declaration

    Swift

    public static func clearData(for resourceOptions: ResourceOptions, completion: @escaping (Error?) -> Void)

    Parameters

    resourceOptions

    The resource options that contain the map data path to be used

    completion

    Called once the request is complete

  • Gets elevation for the given coordinate.

    Note

    Elevation is only available for the visible region on the screen.

    Declaration

    Swift

    public func elevation(at coordinate: CLLocationCoordinate2D) -> Double?

    Parameters

    coordinate

    Coordinate for which to return the elevation.

    Return Value

    Elevation (in meters) multiplied by current terrain exaggeration, or empty if elevation for the coordinate is not available.

  • Transforms a view’s frame into a set of coordinate bounds

    Declaration

    Swift

    public func coordinateBounds(for rect: CGRect) -> CoordinateBounds

    Parameters

    rect

    The rect whose bounds will be transformed into a set of map coordinate bounds.

    Return Value

    A CoordinateBounds object that represents the southwest and northeast corners of the view’s bounds.

  • Transforms a set of map coordinate bounds to a CGRect relative to the MapView.

    Declaration

    Swift

    public func rect(for coordinateBounds: CoordinateBounds) -> CGRect

    Parameters

    coordinateBounds

    The coordinateBounds that will be converted into a rect relative to the MapView

    Return Value

    A CGRect whose corners represent the vertices of a set of CoordinateBounds.

  • The array of MapDebugOptions. Setting this property to an empty array disables previously enabled MapDebugOptions. The default value is an empty array.

    Declaration

    Swift

    public var debugOptions: [MapDebugOptions] { get set }
  • Returns the map’s options

    Declaration

    Swift

    public var options: MapOptions { get }
  • Calculates a CameraOptions to fit a CoordinateBounds

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func camera(for coordinateBounds: CoordinateBounds,
                       padding: UIEdgeInsets,
                       bearing: Double?,
                       pitch: Double?) -> CameraOptions

    Parameters

    coordinateBounds

    The coordinate bounds that will be displayed within the viewport.

    padding

    The new padding to be used by the camera.

    bearing

    The new bearing to be used by the camera.

    pitch

    The new pitch to be used by the camera.

    Return Value

    A CameraOptions that fits the provided constraints

  • Calculates a CameraOptions to fit a list of coordinates.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func camera(for coordinates: [CLLocationCoordinate2D],
                       padding: UIEdgeInsets,
                       bearing: Double?,
                       pitch: Double?) -> CameraOptions

    Parameters

    coordinates

    Array of coordinates that should fit within the new viewport.

    padding

    The new padding to be used by the camera.

    bearing

    The new bearing to be used by the camera.

    pitch

    The new pitch to be used by the camera.

    Return Value

    A CameraOptions that fits the provided constraints

  • Calculates a CameraOptions to fit a list of coordinates into a sub-rect of the map.

    Adjusts the zoom of camera to fit coordinates into rect.

    Returns the provided camera with zoom adjusted to fit coordinates into rect, so that the coordinates on the left, top and right of the effective camera center at the principal point of the projection (defined by padding) fit into the rect.

    This API isn’t supported by Globe projection.

    Note

    This method may fail if the principal point of the projection is not inside rect or if there is insufficient screen space, defined by principal point and rect, to fit the geometry.

    Declaration

    Swift

    public func camera(for coordinates: [CLLocationCoordinate2D],
                       camera: CameraOptions,
                       rect: CGRect) -> CameraOptions

    Parameters

    coordinates

    The coordinates to frame within rect.

    camera

    The camera for which the zoom should be adjusted to fit coordinates. camera.center must be non-nil.

    rect

    The rectangle inside of the map that should be used to frame coordinates.

    Return Value

    A CameraOptions that fits the provided constraints, or cameraOptions if an error occurs.

  • Calculates a CameraOptions to fit a geometry

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func camera(for geometry: Geometry,
                       padding: UIEdgeInsets,
                       bearing: CGFloat?,
                       pitch: CGFloat?) -> CameraOptions

    Parameters

    geometry

    The geoemtry that will be displayed within the viewport.

    padding

    The new padding to be used by the camera.

    bearing

    The new bearing to be used by the camera.

    pitch

    The new pitch to be used by the camera.

    Return Value

    A CameraOptions that fits the provided constraints

  • Returns the coordinate bounds corresponding to a given CameraOptions

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func coordinateBounds(for camera: CameraOptions) -> CoordinateBounds

    Parameters

    camera

    The camera for which the coordinate bounds will be returned.

    Return Value

    CoordinateBounds for the given CameraOptions

  • Returns the unwrapped coordinate bounds to a given CameraOptions.

    This function is particularly useful, if the camera shows the antimeridian.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func coordinateBoundsUnwrapped(for camera: CameraOptions) -> CoordinateBounds

    Parameters

    camera

    The camera for which the coordinate bounds will be returned.

    Return Value

    CoordinateBounds for the given CameraOptions.

  • Returns the coordinate bounds and zoom for a given CameraOptions.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func coordinateBoundsZoom(for camera: CameraOptions) -> CoordinateBoundsZoom

    Parameters

    camera

    The camera for which the CoordinateBoundsZoom will be returned.

    Return Value

    CoordinateBoundsZoom for the given CameraOptions

  • Returns the unwrapped coordinate bounds and zoom for a given CameraOptions.

    This function is particularly useful, if the camera shows the antimeridian.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func coordinateBoundsZoomUnwrapped(for camera: CameraOptions) -> CoordinateBoundsZoom

    Parameters

    camera

    The camera for which the CoordinateBoundsZoom will be returned.

    Return Value

    CoordinateBoundsZoom for the given CameraOptions

  • Converts a point in the mapView’s coordinate system to a geographic coordinate. The point must exist in the coordinate space of the MapView

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func coordinate(for point: CGPoint) -> CLLocationCoordinate2D

    Parameters

    point

    The point to convert. Must exist in the coordinate space of the MapView

    Return Value

    A CLLocationCoordinate that represents the geographic location of the point.

  • Converts a map coordinate to a CGPoint, relative to the MapView.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func point(for coordinate: CLLocationCoordinate2D) -> CGPoint

    Parameters

    coordinate

    The coordinate to convert.

    Return Value

    A CGPoint relative to the UIView. If the point is outside of the bounds of MapView the returned point contains -1.0 for both coordinates.

  • Converts map coordinates to an array of CGPoint, relative to the MapView.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func points(for coordinates: [CLLocationCoordinate2D]) -> [CGPoint]

    Parameters

    coordinates

    The coordinate to convert.

    Return Value

    An array of CGPoint relative to the UIView. If a coordinate's point is outside of map view's bounds, it will be(-1, -1)`

  • Converts points in the mapView’s coordinate system to geographic coordinates. The points must exist in the coordinate space of the MapView.

    This API isn’t supported by Globe projection.

    Declaration

    Swift

    public func coordinates(for points: [CGPoint]) -> [CLLocationCoordinate2D]

    Parameters

    point

    The point to convert. Must exist in the coordinate space of the MapView

    Return Value

    A CLLocationCoordinate that represents the geographic location of the point.

  • Changes the map view by any combination of center, zoom, bearing, and pitch, without an animated transition. The map will retain its current values for any details not passed via the camera options argument. It is not guaranteed that the provided CameraOptions will be set, the map may apply constraints resulting in a different CameraState.

    Important

    This method does not cancel existing animations. Call CameraAnimationsManager.cancelAnimations()to cancel existing animations.

    Declaration

    Swift

    public func setCamera(to cameraOptions: CameraOptions)

    Parameters

    cameraOptions

    New camera options

  • Returns the current camera state

    Declaration

    Swift

    public var cameraState: CameraState { get }
  • Sets/get the map view with the free camera options.

    FreeCameraOptions provides more direct access to the underlying camera entity. For backwards compatibility the state set using this API must be representable with CameraOptions as well. Parameters are clamped to a valid range or discarded as invalid if the conversion to the pitch and bearing presentation is ambiguous. For example orientation can be invalid if it leads to the camera being upside down or the quaternion has zero length.

    Declaration

    Swift

    public var freeCameraOptions: FreeCameraOptions { get set }

    Parameters

    freeCameraOptions

    The free camera options to set.

  • Returns the bounds of the map.

    Declaration

    Swift

    public var cameraBounds: CameraBounds { get }
  • Sets the bounds of the map.

    Throws

    MapError

    Declaration

    Swift

    public func setCameraBounds(with options: CameraBoundsOptions) throws

    Parameters

    options

    New camera bounds. Nil values will not take effect.

  • Prepares the drag gesture to use the provided screen coordinate as a pivot point. This function should be called each time when user starts a dragging action (e.g. by clicking on the map). The following dragging will be relative to the pivot.

    Declaration

    Swift

    public func dragStart(for point: CGPoint)

    Parameters

    point

    Screen point

  • Calculates target point where camera should move after drag. The method should be called after dragStart and before dragEnd.

    Declaration

    Swift

    public func dragCameraOptions(from: CGPoint, to: CGPoint) -> CameraOptions

    Parameters

    fromPoint

    The point from which the map is dragged.

    toPoint

    The point to which the map is dragged.

    Return Value

    The camera options object showing end point.

  • Ends the ongoing drag gesture. This function should be called always after the user has ended a drag gesture initiated by dragStart.

    Declaration

    Swift

    public func dragEnd()
  • If implementing a custom animation mechanism, call this method when the animation begins. Must always be paired with a corresponding call to endAnimation()

    Declaration

    Swift

    public func beginAnimation()
  • If implementing a custom animation mechanism, call this method when the animation ends. Must always be paired with a corresponding call to beginAnimation()

    Declaration

    Swift

    public func endAnimation()
  • If implementing a custom gesture, call this method when the gesture begins. Must always be paired with a corresponding call to endGesture()

    Declaration

    Swift

    public func beginGesture()
  • If implementing a custom gesture, call this method when the gesture ends. Must always be paired with a corresponding call to beginGesture()

    Declaration

    Swift

    public func endGesture()
  • Queries the map for rendered features.

    Declaration

    Swift

    @available(*, deprecated, renamed: "queryRenderedFeatures(with:options:completion:﹚")
    public func queryRenderedFeatures(for shape: [CGPoint], options: RenderedQueryOptions? = nil, completion: @escaping (Result<[QueriedFeature], Error>) -> Void)

    Parameters

    shape

    Screen point coordinates (point, line string or box) to query for rendered features.

    options

    Options for querying rendered features.

    completion

    Callback called when the query completes

  • Undocumented

    Declaration

    Swift

    @discardableResult
    public func queryRenderedFeatures(with shape: [CGPoint], options: RenderedQueryOptions? = nil, completion: @escaping (Result<[QueriedFeature], Error>) -> Void) -> Cancelable
  • Queries the map for rendered features.

    Declaration

    Swift

    @available(*, deprecated, renamed: "queryRenderedFeatures(with:options:completion:﹚")
    public func queryRenderedFeatures(in rect: CGRect, options: RenderedQueryOptions? = nil, completion: @escaping (Result<[QueriedFeature], Error>) -> Void)

    Parameters

    rect

    Screen rect to query for rendered features.

    options

    Options for querying rendered features.

    completion

    Callback called when the query completes

  • Undocumented

    Declaration

    Swift

    @discardableResult
    public func queryRenderedFeatures(with rect: CGRect, options: RenderedQueryOptions? = nil, completion: @escaping (Result<[QueriedFeature], Error>) -> Void) -> Cancelable
  • Queries the map for rendered features.

    Declaration

    Swift

    @available(*, deprecated, renamed: "queryRenderedFeatures(with:options:completion:﹚")
    public func queryRenderedFeatures(at point: CGPoint, options: RenderedQueryOptions? = nil, completion: @escaping (Result<[QueriedFeature], Error>) -> Void)

    Parameters

    point

    Screen point at which to query for rendered features.

    options

    Options for querying rendered features.

    completion

    Callback called when the query completes

  • Undocumented

    Declaration

    Swift

    @discardableResult
    public func queryRenderedFeatures(with point: CGPoint, options: RenderedQueryOptions? = nil, completion: @escaping (Result<[QueriedFeature], Error>) -> Void) -> Cancelable
  • Queries the map for source features.

    Declaration

    Swift

    public func querySourceFeatures(for sourceId: String,
                                    options: SourceQueryOptions,
                                    completion: @escaping (Result<[QueriedFeature], Error>) -> Void)

    Parameters

    sourceId

    Style source identifier used to query for source features.

    options

    Options for querying source features.

    completion

    Callback called when the query completes

  • Queries for feature extension values in a GeoJSON source.

      1. `children`: returns the children of a cluster (on the next zoom
        level).
      2. `leaves`: returns all the leaves of a cluster (given its cluster_id)
      3. `expansion-zoom`: returns the zoom on which the cluster expands
        into several children (useful for "click to zoom" feature).
    
    • args: Used for further query specification when using ‘leaves’ extensionField. Now only support following two args:
      1. `limit`: the number of points to return from the query (must
            use type 'UInt64', set to maximum for all points)
      2. `offset`: the amount of points to skip (for pagination, must
            use type 'UInt64')
    
    • completion: The result could be a feature extension value containing either a value (expansion-zoom) or a feature collection (children or leaves). An error is passed if the operation was not successful. Deprecated. Use getGeoJsonClusterLeaves/getGeoJsonClusterChildren/getGeoJsonClusterExpansionZoom to instead.

    Declaration

    Swift

    public func queryFeatureExtension(for sourceId: String,
                                      feature: Feature,
                                      extension: String,
                                      extensionField: String,
                                      args: [String: Any]? = nil,
                                      completion: @escaping (Result<FeatureExtensionValue, Error>) -> Void)

    Parameters

    sourceId

    The identifier of the source to query.

    feature

    Feature to look for in the query.

    extension

    Currently supports keyword supercluster.

    extensionField

    Currently supports following three extensions:

    args

    Used for further query specification when using ‘leaves’ extensionField. Now only support following two args:

    completion

    The result could be a feature extension value containing either a value (expansion-zoom) or a feature collection (children or leaves). An error is passed if the operation was not successful. Deprecated. Use getGeoJsonClusterLeaves/getGeoJsonClusterChildren/getGeoJsonClusterExpansionZoom to instead.

  • Returns all the leaves (original points) of a cluster (given its cluster_id) from a GeoJSON source, with pagination support: limit is the number of leaves to return (set to Infinity for all points), and offset is the amount of points to skip (for pagination).

    Declaration

    Swift

    public func getGeoJsonClusterLeaves(forSourceId sourceId: String,
                                        feature: Feature,
                                        limit: UInt64 = 10,
                                        offset: UInt64 = 0,
                                        completion: @escaping (Result<FeatureExtensionValue, Error>) -> Void)

    Parameters

    sourceId

    The identifier of the source to query.

    feature

    Feature to look for in the query.

    limit

    the number of points to return from the query, default to 10

    offset

    the amount of points to skip, default to 0

    completion

    The result could be a feature extension value containing either a value (expansion-zoom) or a feature collection (children or leaves). An error is passed if the operation was not successful.

  • Returns the children (original points or clusters) of a cluster (on the next zoom level) given its id (cluster_id value from feature properties) from a GeoJSON source.

    Declaration

    Swift

    public func getGeoJsonClusterChildren(forSourceId sourceId: String,
                                          feature: Feature,
                                          completion: @escaping (Result<FeatureExtensionValue, Error>) -> Void)

    Parameters

    sourceId

    The identifier of the source to query.

    feature

    Feature to look for in the query.

    completion

    The result could be a feature extension value containing either a value (expansion-zoom) or a feature collection (children or leaves). An error is passed if the operation was not successful.

  • Returns the zoom on which the cluster expands into several children (useful for “click to zoom” feature) given the cluster’s cluster_id (cluster_id value from feature properties) from a GeoJSON source.

    Declaration

    Swift

    public func getGeoJsonClusterExpansionZoom(forSourceId sourceId: String,
                                               feature: Feature,
                                               completion: @escaping (Result<FeatureExtensionValue, Error>) -> Void)

    Parameters

    sourceId

    The identifier of the source to query.

    feature

    Feature to look for in the query.

    completion

    The result could be a feature extension value containing either a value (expansion-zoom) or a feature collection (children or leaves). An error is passed if the operation was not successful.

  • Subscribes an observer to a list of events.

    MapboxMap holds a strong reference to observer while it is subscribed. To stop receiving notifications, pass the same observer to unsubscribe(_:events:).

    Note

    Prefer onNext(eventTypes:handler:), onNext(_:handler:), and onEvery(_:handler:) to using this lower-level APIs

    Declaration

    Swift

    public func subscribe(_ observer: Observer, events: [String])

    Parameters

    observer

    An object that will receive events of the types specified by events

    events

    Array of event types to deliver to observer

  • Unsubscribes an observer from a provided list of event types.

    MapboxMap holds a strong reference to observer while it is subscribed. To stop receiving notifications, pass the same observer to this method as was passed to subscribe(_:events:).

    Declaration

    Swift

    public func unsubscribe(_ observer: Observer, events: [String] = [])

    Parameters

    observer

    The object to unsubscribe

    events

    Array of event types to unsubscribe from. Pass an empty array (the default) to unsubscribe from all events.

  • Listen to a single occurrence of a Map event.

    This will observe the next (and only the next) event of the specified type. After observation, the underlying subscriber will unsubscribe from the map or snapshotter.

    If you need to unsubscribe before the event fires, call cancel() on the returned Cancelable object.

    Declaration

    Swift

    @discardableResult
    public func onNext<Payload>(event eventType: MapEvents.Event<Payload>, handler: @escaping (MapEvent<Payload>) -> Void) -> Cancelable where Payload : Decodable

    Parameters

    eventType

    The event type to listen to.

    handler

    The closure to execute when the event occurs.

    Return Value

    A Cancelable object that you can use to stop listening for the event. This is especially important if you have a retain cycle in the handler.

  • Listen to a single occurrence of a Map event.

    This will observe the next (and only the next) event of the specified type. After observation, the underlying subscriber will unsubscribe from the map or snapshotter.

    If you need to unsubscribe before the event fires, call cancel() on the returned Cancelable object.

    Declaration

    Swift

    @available(*, deprecated, renamed: "onNext(event:handler:﹚")
    @discardableResult
    public func onNext(_ eventType: MapEvents.EventKind, handler: @escaping (Event) -> Void) -> Cancelable

    Parameters

    eventType

    The event type to listen to.

    handler

    The closure to execute when the event occurs.

    Return Value

    A Cancelable object that you can use to stop listening for the event. This is especially important if you have a retain cycle in the handler.

  • Listen to multiple occurrences of a Map event.

    Declaration

    Swift

    @available(*, deprecated, renamed: "onEvery(event:handler:﹚")
    @discardableResult
    public func onEvery(_ eventType: MapEvents.EventKind, handler: @escaping (Event) -> Void) -> Cancelable

    Parameters

    eventType

    The event type to listen to.

    handler

    The closure to execute when the event occurs.

    Return Value

    A Cancelable object that you can use to stop listening for events. This is especially important if you have a retain cycle in the handler.

  • Listen to multiple occurrences of a Map event.

    Declaration

    Swift

    @discardableResult
    public func onEvery<Payload>(event: MapEvents.Event<Payload>, handler: @escaping (MapEvent<Payload>) -> Void) -> Cancelable where Payload : Decodable

    Parameters

    eventType

    The event type to listen to.

    handler

    The closure to execute when the event occurs.

    Return Value

    A Cancelable object that you can use to stop listening for events. This is especially important if you have a retain cycle in the handler.

  • Clears temporary map data.

    Clears temporary map data from the data path defined in the given resource options. Useful to reduce the disk usage or in case the disk cache contains invalid data.

    Note

    Calling this API will affect all maps that use the same data path and does not affect persistent map data like offline style packages.

    Declaration

    Swift

    public func clearData(completion: @escaping (Error?) -> Void)

    Parameters

    completion

    Called once the request is complete

  • Update the state map of a feature within a style source. Update entries in the state map of a given feature within a style source. Only entries listed in the state map will be updated. An entry in the feature state map that is not listed in state will retain its previous value.

    Declaration

    Swift

    public func setFeatureState(sourceId: String, sourceLayerId: String? = nil, featureId: String, state: [String : Any])

    Parameters

    sourceId

    Style source identifier

    sourceLayerId

    Style source layer identifier (for multi-layer sources such as vector sources). Defaults to nil.

    featureId

    Identifier of the feature whose state should be updated

    state

    Map of entries to update with their respective new values

  • Get the state map of a feature within a style source.

    Declaration

    Swift

    public func getFeatureState(sourceId: String, sourceLayerId: String? = nil, featureId: String, callback: @escaping (Result<[String : Any], Error>) -> Void)

    Parameters

    sourceId

    Style source identifier.

    sourceLayerId

    Style source layer identifier (for multi-layer sources such as vector sources).

    featureId

    Identifier of the feature whose state should be queried.

    callback

    Feature’s state map or an empty map if the feature could not be found.

  • Removes entries from a feature state object. Remove a specified property or all property from a feature’s state object, depending on the value of stateKey.

    Declaration

    Swift

    public func removeFeatureState(sourceId: String, sourceLayerId: String? = nil, featureId: String, stateKey: String? = nil)

    Parameters

    sourceId

    The style source identifier

    sourceLayerId

    The style source layer identifier (for multi-layer sources such as vector sources). Defaults to nil.

    featureId

    The feature identifier of the feature whose state should be removed.

    stateKey

    The key of the property to remove. If nil, all feature’s state object properties are removed. Defaults to nil.

  • Returns array of tile identifiers that cover current map camera.

    Declaration

    Swift

    @_spi(Experimental)
    public func tileCover(for options: TileCoverOptions) -> [CanonicalTileID]